Paper Drinking Straw Machine

Paper drinking straw machine working principle and short introduction：

Winding different layers paper strip into paper tube with glue.

This kind of drinking straw machine adopt multi-cutting knife system, by servo tracking, cut paper tube into small piece of paper drinking straws.

Raw Material is food grade white craft paper and food grade glue.

Sub-raw material such like oil for lubrication and cooling. White mineral oil.

Standard electric power: 380V/ 3phase/ 50Hz, could change by special requirement

Electric consumption: Rated power, 6.15KW/h

FLA( Full load amp): 13.5A

How many pieces straw per minute. For example: 40m/min, making 6*197mm straws. Consider some waste, we use 225mm for calculating. 40*1000/200=200pcs/minute.

How to judge the output speed: For 6 cutting blade model, 50m/min output speed, 5*197=985mm, nearly 1 meter. The cutting system need drop off nearly 50 times per minute in videos.

U could set total paper tube length in panel. 5*197=985mm. When paper tube arrives 985mm, the cutting blade drop down and cut into straws. It’s better to set 1000mm for paper tube length, waste a little at end to make last straw the same length with other straws.

Remark:

The speed above is paper tube output speed, not paper feeding speed. Some company use paper feeding speed to attract customer on YouTube.

To get a good quality and stable & no stop working, we suggest use a slower speed.

Machine parts：

6 set cut knife

Glue device

Paper frame

What do we need to pay attention to about inferior straws?

The disposable straw is a very inconspicuous thing. People usually use it when drinking soy milk, milk, beverages, and milk tea. As people pay more and more attention to food hygiene, straws used as disposable food and beverage products have also attracted everyone's attention. Most of the disposable straws provided by some breakfast stalls and cold drink shops are inferior products.

General plastic products contain polyethylene and polypropylene, which will produce harmful substances at high temperatures. The raw materials for the production of inferior plastic straws may be industrial-grade polyethylene or discarded plastics. If consumers use them for a long time, they will damage the human liver and cause blood diseases or neurological diseases. The brighter the straws, the greater the safety risks. When drinking hot drinks with this kind of straws, harmful substances in the straws will be released, endangering human health.

http://www.anbomachine.com/